Modeling the diffusion saturation with carbon of austenite doped with chromium
Abstract
Modeling the diffusion saturation with carbon of austenite doped with chromium
Incoming article date: 13.12.2019"Prediction of carbon concentration profiles depending on the cementation parameters is possible using mathematical models, most of which show good results for austenite Fe-C, without affecting the influence of alloying substitution elements. The paper describes modeling using the finite element method of the diffusion saturation of the austenite of the Fe-C-Cr system with carbon during cementation using 15Cr steel as an example, taking into account the influence of temperature, and also provides practical confirmation of the model. For the numerical solution of the problem, the COMSOL Multiphysics program was used. It has been established that for the one-stage cementation mode, the applied model of carbon diffusion in undoped austenite is in good agreement with the experimental data for austenite of the Fe-C-Cr system of steel 15Cr. For a two-stage process, the calculation of carbon concentration in the surface layer has a slightly larger deviation from the experimental data than at a greater depth."
Keywords: carbon diffusion, COMSOL, final method, carburization, cementation, steel, diffusion, mass transfer, alloyed austenite, modeling, elements