Experimental installation for laboratory researches of galvanomekhanichesky sedimentation of zinc from flowing electrolyte on the restored surfaces of details of mobile equipment
Abstract
Experimental installation for laboratory researches of galvanomekhanichesky sedimentation of zinc from flowing electrolyte on the restored surfaces of details of mobile equipment
Incoming article date: 20.02.2015Improvement of technological process of galvanizing in flowing electrolyte without decrease in its reliability and quality of the received deposit can be carried out by carrying out anode etching of the processed surface directly in the main electrolyte of sedimentation. And, providing such conditions of anode etching at which, the details which are formed on a surface products of reactions easily are removed a channel of electrolyte is possible. For the purpose of identification of extent of influence of technology factors on anode dissolution of the processed surface it is necessary to conduct elektrokhikmichesky researches. The installation including electric was for this purpose developed and made and gidravklichesky speak rapidly. The Elektkrichesky part contains power-supply circuits of an electrolytic cell to the asymmetric variables odnopoluperiodno straightened, dvukhkpoluperiodno straightened by current and straightened by current with the lowered pulsation, and also a chain of heating of working electrolyte. The hydraulic scheme of experimental installation includes: the kisloktostoyky electric pump, pipelines, filters, the device for an electrolytic precipitation of coverings and a bathtub with electrolyte. Electrolyte in a cell moved by means of the electric pump. Giving changed in steps, due to change of diameter of the section through passage of the giving pipeline by means of replaceable inserts. Authors of the device for electrolytic drawing coverings are Zakharov Yu.A. and Spitsyn I.A. (patent No. 2155827). The design allows: to increase the speed of a channel of electrolyte; to carry out activation of the cathode, using energy of a channel of electrolyte; to increase the accuracy of copying of the cathode the activating elements; to use higher density of current and to reduce power consumption of the device. Electrolyte, in the course of sedimentation, was constantly filtered. As filtering material used fiber glass. The filter if necessary it is possible to dismantle and wash out quickly. Such filtering element slightly interferes with a channel of electrolyte, is simple in service, is cheap and quite sufficient. Thus, the offered design of experimental installation allows to conduct necessary researches of process of sedimentation of a zinc electrodeposit for its improvement.
Keywords: case detail, restoration, repair, defect, resource way of restoration, car repair production