×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

Calculation of the deformability of the CLT overlap panel

Abstract

Calculation of the deformability of the CLT overlap panel

Rogozhina A.V.

Incoming article date: 19.04.2022

CLT panels (English: Cross Laminated Timber) were chosen as the object of the study. This is a multilayer material made of coniferous and hard-leaved wood, which has a system of cross—glued wood in its composition. As part of the work, the available literature on this topic was analyzed, the calculation and analysis of the results obtained were carried out. The article presents the results of the calculation of the CLT panel with consideration of the possibility of isotropic and orthotropic setting of the stiffness of the panel, using elastic modules along and across the fibers. The calculation results are presented in the form of maximum deflections of the panel. Applications in the calculation of the modulus of elasticity across the fibers and taking into account orthotropic stiffness clarifies the stress-strain state of the overlap panel. Based on the calculations performed and the analysis of the results obtained, conclusions are drawn.

Keywords: CLT-panel, transverse bending, modulus of elasticity, stiffness, stress, deflection, orthotropy