A review of the literature in the field of construction heat engineering and regulatory requirements for thermal protection of buildings is given. A study of methods of increasing thermal protection for reconstructed and designed buildings, taking into account modern requirements, has been carried out. A methodology for strengthening the thermal protection of building structures has been developed.

Keywords: thermal performance of building , energy efficiency, heat-efficient enclosing structures, thermal insulation materials

The wastewater generated by the pulp and paper industry contains diverse contaminants such as organic substances, fine suspended powders, and dissolved solids. Currently, integrated treatment technologies are employed, utilizing thin-layer settling tank modules to eliminate solid contaminants. This study presents the outcomes of a comparative analysis of the efficacy of a conventional thin-layer module with flat plates and a modified thin-layer module consisting of two levels of plates, positioned in opposing directions, facilitating the rotation of water flow within the module. Through computer simulation techniques, it is demonstrated that the modified module design can enhance the cleaning efficiency by 8-30% for wastewater flow velocities ranging from 0.0025 to 0.0125 m/s. Additionally, particle trajectories and velocity fields were obtained, which clearly illustrate the direction of the dictating flow and circulation zones within the structure.

Keywords: Wastewater, pulp and paper industry, thin-layer module, module with rotation of water flow, computer simulation of particle deposition.

The design of energy-efficient buildings is based on the analysis of the external climatic effects on buildings for various purposes, the parameters of the air environment inside which are well defined. Climate systems of buildings should neutralize the negative impact of the external environment, in particular wind exposure. It determines both the temperature regime of the room and the purity of the air inside them. The complexity of both theoretical research and the organization of field experiments or blowing models of buildings in a wind tunnel makes it necessary to resort to mathematical modeling of the wind impact on the school building based on the StarCCm+ program. Velocity fields were obtained for different directions of wind load, the excess heat loss of the building in certain directions was determined. The possibility of conducting such studies in a wider range of initial and boundary conditions is shown.

Keywords: aeration of residential buildings, mathematical modeling

The article is devoted to the control system for the process of moving textile material in an apparatus for impregnating fabrics with periodic action. The control is implemented using a programmable logic controller (PLC). We consider a program developed in the Ladder Diagram (LD) programming language that implements motion control taking into account the change in torque.

Keywords: solution, immersion, technological process, algorithm, programming language LD

Reducing the consumption of heat resources in construction and housing and communal services is one of the key tasks solved by design engineers. The increase in the thermal protection of buildings is determined by regulatory documents, but construction customers often require it to be strengthened without any feasibility study. The objective of the study is to develop a graphical-analytical model, the analysis of which allows you to choose the most optimal combination of heat resistances of the coating (walls) and translucent structures of a particular building object.

Keywords: energy-saving project, thermal protection of buildings, "indifference" curves, the method of the fastest descent

The issues of ensuring the reliable operation of bearing production on the basis of the organization of the process monitoring system (SMTP), based on the introduction of effective automated control and diagnostics of technological equipment, including processing modes and technical condition, active control of product quality in the manufacturing process, output characteristics of rings processed by the eddy current method, as well as making decisions on timely maintenance of equipment. The results of the inspection are stored in a report file generated in the eddy current device computer: information about each checked part is stored: the time of inspection, the type of part, the surface to be monitored, the number of the machine on which the part was processed. The results of eddy current control serve as the basis for monitoring the dynamic characteristics of the equipment by vibroacoustic vibrations. Based on the results of the control within the framework of the SMTP, a decision is made on the quality management of processing. The introduction of SMTP provided a significant reduction in ring defects in terms of grinding quality up to 2-3 % and increased operational reliability of bearings.

Keywords: grinding process monitoring, bearing rings, dynamic machine quality, active control, eddy current control, ring quality

The article deals with building a seasonal model with a linear growth of the Winter’s statistic value, on the basis of which the parameters are calculated: the customs value index and the weighted average rate, which are the composition of the calculation formula of customs payments. To build the model, the monthly data of the customs statistics on imports of 28 commodity group “Products of inorganic chemistry; inorganic or organic compounds of precious metals, rare earth metals, radioactive elements or isotopes” of the Customs Nomenclature of the external economic activity of EAEU from 01.01. 2018 up to 31.12.2020 are used in the region of activity of the Southern Customs Administration.

Keywords: time series, econometric modeling, forecasting, adaptation parameter, seasonality coefficients, adaptive model

Reducing energy consumption in the design, installation and operation of engineering networks is implemented in the process of implementing investment construction projects. An energy service contract, like any economic agreement, requires a feasibility study. When strengthening the thermal protection of a building, it is necessary to determine both the design of the fences and translucent structures, and the payback period of the investment. The objective of the research is to develop and analyze a mathematical model of heat losses depending on the characteristics of the resistance to heat transfer of walls, windows and balcony doors. Classical dependencies do not allow applying standard mathematical analysis procedures. It is proposed to use a power function that assumes the availability of differentiation. The paper substantiates the form of such a function and provides an extended analysis of the effect of changes in the resistance to heat transfer of building structures on the transmission heat losses of a building, which allows arguing for the adoption of optimal technical and economic decisions.

Keywords: energy-saving construction project, thermal protection of buildings, indifference curves, mathematical model of heat loss

In the present work optimization of technological process of production of Cabinet furniture at the expense of introduction of system of the automated workplaces (AWP) with application of technology of bar-coding on an example of the concrete enterprise is offered

Keywords: Cabinet furniture, furniture production, automated workplaces, bar-code, bar-coding of details, bar-coding of tasks

The calculation algorithm is given and various options for solving the problem are considered when changing the parameters of the design scheme of the rod system on the example of a beam in the MS Excel software environment together with the MathCAD package. The proposed approach allows you to combine formulas, graphics, and calculation results on a single sheet, which is especially useful in the educational process. It contributes to a more conscious perception of the calculation process by students, allows them to implement various forms of distance learning in information technologies.

Keywords: the core of the system, algorithm, modelling, integration, information technology

The article considers the results of development of water treatment technology for household drinking water in Semey, presents a comparative analysis of widely used disinfectants, and considers technological schemes for water disinfection with chlorine dioxide and a combined disinfectant " chlorine dioxide and chlorine".

Keywords: household drinking water, disinfectants, chlorine

The article deals with organizational and technological features of construction project management based on BIM-modeling. The methodological approach with the use of information modeling technologies, based on the account of time and resource constraints, which will improve the efficiency of construction project management, is proposed

Keywords: Organizational and technological features, construction projects, BIM-modeling, management, efficiency, planning, construction organization

In the article the features of application of logistic approaches of the organization of movement of the cable cars, as well as the method of selecting the cable car and the slopes at various characteristics of the operation of the complex. The results of experimental research on the network of cable cars of the mountain resort "Rosa Khutor"are offered. The paper uses the methods of monitoring the movement of passengers on cable cars by means of identification by ski pass and GPS

Keywords: transport mobility, route network, public transport, automated monitoring of passenger traffic, logistics approach, cable car, monitoring of cable car congestion on-line, traffic volume, digital transport management system

The important function of the automatic process control system is the ability to forecast and control the quality of a product. The implementation of these functions can be done by using formal models that allow to do the quick reconfiguration of the technological process when the composition of the raw materials and the requirements of product characteristics are changed, etc. in relation to the prediction and management of quality indicators of road and construction bitumens, methods of getting formal models that relates bitumen quality indicators with technological parameters of their production both for classical regression equations and for formal neural networks. The method of getting such models has been worked out on abstract dependencies with further adaptation of the production of bitumen. According to the received formal models the automated process control system can solve both the direct problem of predicting quality indicators by substituting the input technological parameters for the model input, and the inverse problem using nonlinear programming methods to minimize the deviation functions of the quality parameters obtained from the model from the target values given operator technologist.

Keywords: Bitumen, quality indicators, quality forecast, management of the quality, formal models

The article gives a systematic review of the architectural composition of the oldest capital urban complex of the North Caucasus – the fortress of Derbent. On the material of historical sources stages of urban planning are reconstructed, the role of economic and foreign policy factors in the development of the urban environment in historical retrospect is shown.

Keywords: industry history, architecture, urban planning