Considered part of the software and hardware designed and manufactured the device for the automatic analysis of nonlinear parameters of high-temperature superconducting ceramics YBa2Cu3O7-x in variable magnetic fields. Shows the calibration and specifications. The new is a synchronous (the error in determining the phase of no more than 0.5%) of digital signal samples of the nonlinear response of the sample and the samples generated by an external magnetic field (the error is less than 1%), with the number of data samples per channel to 90 ∙ 106 12-bit samples and sampling 600 ∙ 103 samples per second. The reference range of variable magnetic fields 1 - 50 Oe, a frequency range of 1 - 50 kHz in steps of 1 Hz and the accuracy of 0.0291 Hz. The device has an interface to the computer via two USB-interface and original software to work with it. With the use of the device, a series of experiments designed to produce some non-linear parameters of cylindrical sample made of high-Tc ceramic YBa2Cu3O7-x. The analysis of the results and their comparison with the presented in the literature  

Keywords: Nonlinear medium, high-temperature superconducting ceramics, synchronous samples, harmonics, ARM-9 CPU, a differential sensor.

An overview of research related to the tasks of processing and filtering of signals. Signal is considered as a random process defined by probabilistic characteristics. This article addresses the issues of the history of the development of methods of signal filtering. Recent scientific publications in which the results and the main directions of research in the field of signal processing and filtering are analyzed. Presented material extends the current state of knowledge about the problem.

Keywords: signal, signal filtering, signal processing, stochastic process

"This review covers various methods of synthesis LaMnO3 ferroics. The general analysis of the solid-phase synthesis reactions methods and wet methods (sol-gel, sorption, co-precipitation) are carred out. The original results of LaMnO3 syntheses from various precursors by means of the in situ method are showned. The advantages and disadvantages of different methods of synthesis are determined. The analysis of synthesis LaMnO3 ferroics published data is shown:
- the structure formation of LaMnO3 in perovskite-type phases occurs at different temperatures, depending on precursors states;
- LaMnO3 perovskite phases differ in symmetry and unit cells parameters at room temperature, depending on the preparation conditions;
- the highest synthesis temperature of LaMnO3 are typical for solid phase reactions method (950-1050 ° C), the lowest - for wet synthesis methods (500-700 ° C);
 - the synthesis conditions effect the stoichiometry of LaMnO3 for oxygen content.
Our studies of structure formation processes of LaMnO3 by in situ method are allowed to define the role of precursors states at synthesis of solid phase reactions methods, adsorption, co-precipitation and sol-gel mixtures.
It is determined that in samples prepared by wet chemical methods, the formation processes of  LaMnO3 perovskite phases occur at lower temperatures than by solid phase reaction (sol-gel precursor - 500 <T <600 ° C; precursors obtained by coprecipitation and sorption methods - at 600 <T <700 ° C and 700 <T <800 ° C, respectively).  

Keywords: ferroics, LaMnO3, X-ray diffraction, solid-phase synthesis, sol-gel synthesis, sorption, co-precipitation

The existing methods of calculation of the annual change in soil temperature. Identified areas of their application and the possible deviations from reality. The requirements to the boundary conditions of the calculation. Defines the principles of the choice of initial conditions. The preconditions for the development of a universal method of calculation.

Keywords: heat pump, renewable energy, solar radiation, transient mode, soil

Currently actively developing direction of seismic protection, the identified using absorbing screens made in the form of sandwich structures with упругопластическими energy-absorbing elements. In this article, on the basis of the conducted research and analysis, the formulas for the calculation of power characteristics of belt elastic element.

Keywords: Dynamic loading, uprugoplastichesky deformation, deformation chart, power absorption

Defined criteria for identification of defect parameters, on the basis of the analysis of the different modes of own fluctuations, with the use of finite element modal calculation console corpulent model of a rod with a single defect. Developed finite element model of a universal complex . Considered corpulent (3-d) model on the basis of 3D finite element Solid92. When solving the problem considered on 26 oscillation modes depending on the size of the defect and its location.

Keywords: Damaged, defective, swing, cantilever, frequency

The possibilities of waveguide elements realization in the structure of multilayered integrated chips of centimeter and millimeter ranges with SIW (Substrate Integrated Waveguide)-technology application are considered. The approaches allowing effectively using in new structures the algorithms and techniques of the electrodynamic analysis and synthesis of passive devices on classical all-metal waveguides are offered. Advantages of use in SIW structure the waveguides of complex cross-section are considered on the example of the microwave band-pass filter.

Keywords: A.A. Gadzieva, V.V. Zemlyakov, S.V. Krutiev

The results of the heat transfer processes studies in the heat exchange borehole (BHE), equipped with coaxial collector in order to establish the influence of its design parameters, the properties of the rock mass, mode and duration of the coolant flow to the effective temperature difference. The resulting analytical equation for the effective temperature difference in the conditions of unsteady heat transfer experimentally verified in a lab BHE and can be used in the design of these BHE systems in specific geological and technical conditions. Use the resulting equation for the inverse calculation can be counted the diameter and the depth of the BHE, as well as the duration of the coolant circulation in the coaxial collector. The advantage of such approach is the consideration of the main factors that influence the of the effective temperature difference.

Keywords: borehole heat exchanger (BHE), effective temperature difference, coaxial collector, heat pump, low-potential energy

The analysis of temperature dependence of frequencies of lines  is conducted active in the spectrums of combination dispersion of  perchlorate of natrium. The theory analysis of spectrums is conducted.

Keywords: Perchlorat of natrium, anion, spectrums of combination dispersion, phase change

  Laboratory technology was developed to fabricate flexible piezocomposites with ferroelectric phase - polymers having signal reception factorv • gv 5000 • 10-15 m2 / N. The values of the given coefficient were achieved by switching from a probabilistic (spontaneous) percolation to a correlated one in the process of forming material. This made the production of 0-1–3 piezocomposites, in which a part of piezophase has 0 connectivity, and the other part – 1 connectivity possible. To improve the efficiency of piezocomposite polarization before their manufacturing the surface of piezophase particles, which were obtained by the partial destruction of the porous frameworks, was treated with coupling agent, which did not only improve the polymer adhesion to piezophase, but also allowed the removal of water from the particle surface. The latter effect reduced the value of interfacial conductivity, i.e. prevented the voltage drop of the polarizing field. Matching of polymer conductivity and piezoceramic particles by determining the optimal polarization temperature was carried out as well.  

Keywords: piezocomposites, percolation, connectivity, electrophysical properties

  In this article the mathematical model dynamic process installations for blast cleaning the surface, and clearly showed the graph of the transition process, given the theoretical integer parameters yield in the specific process conditions.

Keywords: Fluid Technology, a dynamic characteristic of the drive, nozzle - gate, jetting processing surface

Article focuses on the use of statistical models to predict tolerability surgery using intracavitary hyperthermic chemotherapy (IHCT) and the definition of indications and contraindications to perform operations and tolerability for patients with cancer based on the hemostatic patient. This technique allows a high enough accuracy to prediction portability planned surgery, duration of disease-free period, the period and quality of life in the immediate and late postoperative period.Improve treatment of patients with malignant tumors of the abdomen and pelvis, is one of the priorities of modern health care. Relevance of various parameters of immunity, clinical and biological parameters of homeostasis and prognosis of malignant disease in humans will significantly reduce the proportion of late diagnoses of relapses. Recently there has been increased research to find a method of complex cytoreductive surgery and the use of cytotoxic drugs, and physical therapies, one of which is a local intraoperative hyperthermic chemotherapy. With the help of statistical methods has been studied the degree of influence on the parameters IHCT immunity and an estimate of the nature of the immunological changes in different types of surgery. Methods of binary logistic regression analysis was calculated diskriminatnogo forecast portability operation - patient survival probability. Based on the method of multiple regression were obtained algorithms calculate the duration of life of patients after surgery, and the duration of DFS. Studies based on the factor analysis showed that the main factors affecting the prognosis of disease-free period and the period of life are the morphological structure of the tumor volume cytoreduction, the sum of your immune system and cancer markers. Peritoneal cancer index, sex and age of the patient does not have a significant effect on these parameters. Thus, the introduction into clinical practice of the proposed computer systems and statistical forecasting models allow physicians to objectively evaluate the performance of homeostasis, the portability of the planned surgery, more accurately predict the course of the cancer disease and the likelihood of recurrence of the disease and the duration and quality of life.

Keywords: statistics, modeling, forecasting, surgery, colorectal cancer, disease-free life expectancy, tolerance of surgery, immunological parameters, factor analysis, regression equation

To create in Rostov-on-Don, ecologically effective, technologically advanced and durable green plantings to solve the problem: 1. Create a variety of trees for landscaping cities and towns; 2. Determine the principles of green plantings, ensuring their maximum environmental efficiency. In the steppe zone of Russia should use the structure of the park, with a high proportion of dense plantings (400 trees per hectare) of long-lived trees of the first magnitude.

Keywords: green building, greening cities, assortment of trees, ecologically effective green plantings, the steppe zone

  The requirements to be met by a data acquisition system in terms of each of the problems to be solved. Presented electric concept developed biopotential amplifier with a total gain of 2000. The theoretical model of the spectrum of RR intervals and changes depending on the running processes. The analysis revealed that the resulting spectrum satisfies the conditions considered in the theoretical model, and can be further analyzed with fractal characteristics.

Keywords: Instrumental amplifier, biopotential, fractal index

  The purpose of investigation is to examine the effect of adaptation to difficult-house physical stress on the regulation of the vertical posture of man. For the analysis of the ability to maintain a vertical position used stabilographic hardware-software complex "Stabilan-1-02" (JSK Rhythm ", Russia). The ability to maintain a vertical position was evaluated in two static positions: 1) the main stand (OS) in the presence and absence of visual information, and 2) dip (PP) in the presence of visual information. Revealed that an increase of physical performance ability to maintain balance in static positions, especially in the complicated conditions (deprivation of visual information and static muscle tension) increases.

Keywords: Sports stabilometry, adaptation, vertical pose