In operation the case of distribution of an ultrasonic wave in a water pipe located in the dense ground and subject to activity of radial pressure of a ground is viewed.

Keywords: acoustics, monitoring, ground, distribution, wave, water pipe

The article presents the author's method of evaluation competitiveness of construction technologies. The main factors that have influence on the choice of the most competitive construction technology are indicated. The paper contains suggestions on forming the aggregation of local criteria intended for complex estimation of efficiency of any construction technologies. Expediency of vector optimization of competitive technologies is substantiated. The field of rational application of research results is shown  

Keywords: construction technologies, complex estimation of efficiency, competitiveness, local and global criteria.

In operation the case when the cylindrical pipe is not completely filled by water is viewed, the ultrasonic radiator is located on a shell of a water pipe. It is shown, that for the given case, it is expedient to view the symmetrical and assymetric modes of distribution of an ultrasonic wave.

Keywords: acoustics, emitter, wave, water pipe

  This paper presents a method of constructing microwave selective amplifiers, which allows control Q and voltage gain at the frequency of quasi-resonance. The presented architecture selective amplifiers for SiGe process technology have low power consumption.

Keywords: RC-filter, good quality, controlled selective amplifier, gain, frequency quasi-resonance

This article discusses the definition of the bearing capacity of piles to strengthen the base of the building, with the considering differential settlement, with formulation of a  nonlinear problem of a residential building in Belovo, Kemerovo region. These results were used at develop methodology for restoration of buildings and structures on the basis of monitoring  

Keywords: differential settlement, bearing capacity of piles, physical nonlinear formulation, finite element method

The summary. In article, with the account of generalisation of references, questions of essence and methodology of an estimation of economic efficiency of manufacture are considered. On materials of subjects of the Russian Federation the estimation technique potential of territories is developed and realised (with the account occupied in economy, fixed capital, investments into fixed capital, innovative possibilities), the estimation, from positions of measurement of productivity of live and last work, efficiency of functioning of regional economy is carried out.

Keywords: Keywords: an estimation, efficiency, productivity, potential, region, innovative possibilities.

It is presented in article that the technique of determination of stochastic similarity of functioning of one of subsystems of the intensified hydrothermal treatment - moistening of details of top of footwear. According to the offered technique there were received to be expressions for determination of output parameter of process "moistening" - the module of elasticity of skin and relative deviations of characteristics the subsystems proving similarity functioning of considered subsystems in stochastic sense. According to the offered technique expressions for determination of output parameter of a subsystem of "moistening" - the module of elasticity of skin and relative deviations of independent parameters of process of the vacuum and sorption moistening, providing with the possibility of forecasting of the minimum duration of processing were received.

Keywords: stochastic similarity, means-equipment-technology-production system, the processing intensified hydrothermal treatment, the vacuum and sorption moistening, the determined similarity, tanning and shoe materials

The values  the frequencies of the stretching vibrations of anions  SCN-,  NO2-, NO3-, CℓO4- in molten salts of alkali metals and their point group symmetry. There is a correlation with an increase in the frequency of symmetry  

Keywords: Raman Spectra; anions; molten solts; group symmetry.

Justification of need of increase  energy efficiency in buildings of the raised number of storeys is given. The basic principles of increase  energy efficiency in residential buildings are formulated. The analysis of a complex of energy saving actions for different types of residential buildings is carried out  

Keywords: energy saving actions, residential buildings of the raised number of storeys, efficiency assessment.

  To estimate the effectiveness of forest machines developed technological possibility coefficient. Coefficients reflect the ability to provide a given performance of transport vehicles in the logging, the decline in the quality of the skid road surface. Method allows determining the amount of logging residues, necessary for the skid road construction. At calculating the available volume accounted for logging residues. Resources of logging residues are calculated depending on the type of timber and the length of skid road. The method allows selecting the optimum system of machines to work in these natural production conditions or schedule performance loss due to reduced carrying capacity of skid road.

Keywords: Cross country, technological passableness, forest machines, bearing capacity of soils, skid road, wood types, logging residues

Proposed an approach to calculate the inductance per unit length of twisted pair at microwave frequencies. Analytical relations to calculate the inductance per unit length of double line and twisted pair at microwave frequencies. An efficient algorithm for the approximate calculation of the inductance per unit length of twisted pair at any veins angle.

Keywords: inductance per unit length, microwave frequency, twisted pair, double line, veins angle

The features of the port transport and technological systems from the point of choosing the location of the distribution terminal, as the damper areas on the directions of export cargo. The authors propose a modification values of the coefficient of proportionality fractional power function the gravitational model and introduced the term "measure transport gravity" to evaluate options for placement of distribution terminals in the transport network.

Keywords: Port rail transport technology system, cargo traffic, distribution terminal, graph theory, a modified gravity model, a measure of the transport of gravitation factor saturation network connections

The spectra of thermally stimulated conduction currents (TSCC) in (TmBi)3(FeGa)5O12:Ca2+ ferrite-garnet films have been investigated with the purpose to reveal electrically active centres. The samples were fabricated by liquid phase epitaxy (LPE) from melt solution on the Gd3Ga5O12substrates with the crystallographic orientation (111) with the use of Bi-containing flux (without Pb). Increasing the concentration of Ca2+ions in the films were realised by increasing the concentration of CaO in the melt solution. The obtained films contained Ca2+ ions from 0,03 f.u to 0,1 f.u. With the help of standard thermoactivation current spectroscopy the spectra of the initial samples and samples subjected to ultraviolet radiation and negative corona discharge were obtained. The characteristic parameters of electrically active defects were calculated.

Keywords: thermally induced electrical current, ferrite garnet films, electrically active centres, deep-level capture, charge compensation, Ca- doping, ТСТП-spectra, temperature position

  Sensitive element of CO sensor was created by pulsed laser deposition and it was integrated in device of surface acoustic waves (SAW). Photoluminescence was used to control of oxygen-related defects of ZnO nanorod arrays. It is shown that the deficiency of oxygen in zinc oxide nanorods can be increased by change in temperature synthesis of nanorods of 850 to 915 ° C with a high argon pressure, and control of the deficiency of oxygen by increasing the ratio of the intensity of radiation in the visible region of the luminescence intensity in the ultraviolet region of the spectrum can help to increase the sensitivity of CO.

Keywords: ZnO nanorods, photoluminescence, CO sensor

  The model of on-line transaction processing system architecture constructed by a principle of cloud structure is considered. The mathematical model of OLTP-system as the queuing system is offered. Results of modeling and their analysis are led.

Keywords: On-line transaction processing system, Cloud architecture, Distributed database, Queuing system