The article discusses one of the problems of modern software - hardware complexes for control of hydrounit  hydroelectricity plant, namely the lack of an embedded system diagnostics of technical state of various hydrounit components . In work present an approach for the implementation of diagnostic systems of one of the most important parts electro - hydraulic actuator  system to control the opening of the wicket gate. The diagnostic model and the basic control chart basic elements of electro-hydraulic converter , namely the main valve and servomotor .

Keywords: Gydroelectricity plant, hydrounit, diagnostics, modeling, control chart, electro - hydraulic actuator.

The research of algebraic cryptanalysis method was carried out in this work. Systems of the equations for tables of various sizes of nonlinear transformations of substitution for simplified model of GOST28147-89 algorithm are received, also we solve a one of this systems by a XL method. During this work we produced a program, which has realised a generation and solving of system of equations describing nonlinear transformations of substitution. We analysed a nonlinear systems of equations and calculated a value of complexity of XL method for eight blocks of substitution.

Keywords: Algebraic cryptanalysis, XL method, nonlinear transformations of substitution, linearization nonlinear systems, Gauss elimination method, a cryptographic key, GOST28147-89 encryption algorithm

With the use of pulsed laser deposition and carbothermal synthesis а photosensitive structure on the basis of the Schottky barrier Au/ZnO(nanorods)/ZnO(film)/ZnO(nanorods)/Au was obtained. The parameters of the carbothermal method of synthesis of nanorods ZnO were optimized. Under directly applied bias of 7V current sensitivity of luminous flux for this photodetector is observed in the UV and visible regions of the spectrum, and is 0.14 A/W - for 325 nm and 0.18 A/W - to 405 nm, which means that this structure has the ability of potential applications in various fields for the control of UV radiation (for example, for the monitoring of solar UV radiation, control of UV radiation in air and disinfecting water devices).

Keywords: ZnO nanorods, Schottky barrier, photodetector, photosensitivity

ZnO nanorod arrays have been synthesized on silicon wafers by chemical vapor deposition (CVD) technique with different  temperature modes, without metal catalyst.  With this method   vertically aligned ZnO nanostructures  were grown at the quite low temperatures.  Modification of the method allowed to place silicon substrates in areas with different  ratios of concentrations of the molecules in the vapor phase. Photoluminescence spectroscopy and electron microscopy studies have shown that morphologies and optical properties of nanorods depends on different ratios of concentrations of the molecules in the vapor phase.

Keywords: ZnO nanorods,chemical vapor deposition (CVD), photoluminescence

The arrays of ZnO nanorods were obtained on the sapphire substrates by means of pulsed laser deposition under the high pressure of argon. The conditions of synthesis were optimized, and their influence on the morphology of  ZnO nanostructures were revealed. It is shown that the concentration of oxygen vacancies in ZnO nanorods can be changed by regulation of the synthesis temperature from 850 to 915 °. This process can be controlled by the ratio of intensities of the photoluminescence emission in the visible and ultraviolet regions. So, it allows to create nanostructures for UV photodetectors or chemosensors depending on the temperature choice.

Keywords: ZnO nanorods, laser deposition, PLD, photoluminescence

Calculation of acoustical pressure in the main water pipeline filled with water is in-process carried out, at affecting of cavitation processes. Calculation is lead by means of interactive system MatLab

Keywords: Acoustics, pressure, extending, wave, the main water pipeline, cavitation

Features of sampling of the piezoceramic transducer for the arrangement of structural monitoring of water supply systems are in-process observed and calculations of basic performances of the sensing transducer (material PZT-5A) are led

Keywords: piezoceramic transducer, ultrasound, monitoring, structure, extending, water supply systems

Relationships and dependences between parameters of an ultrasonic pulse and water tube structure are in-process observed

Keywords: ultrasound, monitoring, structure, extending, water supply systems

The device for energy takeoff in water systems on a bottom piezoceramic a device entrained in a water stream is in-process observed. The water stream, contacting with piezoceramic a device, calls it oscillations and potential emersion on plates.

Keywords: piezoceramic a device, piezooscillator, monitoring, structure, a water stream, water supply systems

The intelligence system of monitoring of technological parameters of the water pipeline is in-process observed, allowing to lead an estimate of reliability of water supply systems and optimisation of plots of repair

Keywords: Intelligence system, monitoring, structure, technological parameters, the water pipeline, reliability, repair

Expressed need for a new approach to the development of underground space. The main task of complex monitoring at various stages of the life cycle of the underground facility. The description of the measuring stations to monitor the efforts of roof bolting

Keywords: Underground space development, monitoring, vertical shaft, anchor

The most promising technologies of concrete and reinforced concrete for the underground construction and transport. The studies with the inclusion of concrete and steel and polypropylene fibers. The factors affecting the strength and modulus of deformation materials. The conclusion about the need to study the effectiveness of the concrete with a combined reinforcement.

Keywords: Concrete and underground construction, fiber, strength, modulus of deformation

The author reviews the basic content of  marketing competence in theoretical terms.  The marketing competence includes  situational forecasting orientation for  effective marketing communications building at promoting business services.

Keywords: marketing competence, situationally-future orientation, marketing communications, business, management service

The analytical method for calculation of induction and inductive properties of conducting cylinder with azimuth density of rotational current has been proposed. The method permits: to calculate radial distributions of azimuth component for strength vector of rotational electric field, densities of whirling currents, specific heat rating, being emitted at the local area of conductor; to determine the dependence of average electro moving force (EMF) in the ring, inductive current and integral ohmic resistor from equivalent cavity’s radius of cylinder; on the base of energy considerations to calculate the inductance, being introduced by conducting cylinder. This calculation is executed for investigated electromagnetic fields, where the finite phase shift between the current and the flux exists. 
Estimations, executed for real conductors and semiconductors, point out to that the great values of inductance can be achieved at the low frequencies for materials with a small specific resistance. The small values of inductance can be achieved at the very high frequency (VHF) and extremely high frequency (EHF) for materials with a large specific resistance.  

Keywords: introduced inductance, induction, rotational electric field, alternating current, magnetic field flux

The paper analyzesthe background for innovation policyin catering. The paper studiesthe current situation in the industry of Yekaterinburg, reveals significantfactors influencingconsumer’s choiceof food services,consideringthe latesttechnologicalequipment usedin the industry.

Keywords: food service industry, innovation policy, quality and safety management

The method of application of fuzzy logic to solve the problem of spatial planning using geographic and information systems is described. The spatial arrangement of objects on the map is used as input factors of the solution, to find which a model of the spatial descriptions of objects using a bitmap representation is constructed. The way of formalizing fuzzy judgments about positional relationship of objects and the system of inference making based on the fuzzy logic methods is developed. An example of using the method described in this article to determine the sanitary protection zone of industrial waste landfill in the territory of the Republic of Bashkortostan is given

Keywords: fuzzy logic, geographic information systems, the problem of territorial planning, disposal of industrial waste, protection zones

The paper describes a method to build Jerah krietriev for solving decision making in the management of complex multivariable systems based on functional decomposition . The result of functional decomposition takes the form of an ontology -based posnroennoy deskriptinvyh logic to build a hierarchy of concepts. The advantage of this method is the ability to use it for semi-structured systems. The result of the ontological analysis of the functional structure of the system is the taxonomy, including a description of the processes , organizational structures, and indicators of quality of running processes . When referring to this ontology by using the proposed request is generated hierarchy of indicators , based on the processing of values ​​is carried out and decisions .

Keywords: ontological analysis, systems analysis, ontology, descriptive logic

At the present time in most countries of the world are being actively developed and introduced intelligent technologies necessary for creation of reliable and effective intellectual energy systems. Intellectualization of distributive electrical grids will move energy system to a new level of automation. Evenly distributed electrical grid of hexagonal type was offered. The principle of creation a grids was described, a typical scheme of universal electrical load unit was proposed. The key advantages of the hexagonal network was reviewed. The estimation of the reduction of the level of losses during electricity transportation was made. The increase of the level of reliability, the factors affecting the probability of faultless work were determined. Evenly distributed grids of hexagonal type will build energy system based on Smart Grid and solve existing problems: lower quality of electricity, the shortcomings of the power reserves, high density of electrical loads and high energy losses. Project implementation should be carried out in stages: from pilot project to implementation in big cities.
Work is executed with financial support of Ministry of education and science of the Russian Federation (state contract №14.516.11.0104 from 14.10.2013).  

Keywords: electricity, hexagonal grids, smart grids, distribution grids 10-20 kV, reliability of power supply

This paper outlines the implementation of computer model of second-order visual mechanisms that are specific to spatial contrast modulations, and represents the results of testing the model. Computer simulation is based on "Filter-Rectify-Filter" model with some important additions. The inhibitory parts of receptive field of simulated mechanism are non-selective to orientation and spatial frequency of texture elements. Texture modulated by orientation or spatial frequency does not reduce flank inhibition and does not activate the mechanism. Unmodulated texture  also does not cause activation of the filter because the flanking inhibition will be equal to or exceed the excitation. However, increasing the contrast in the center and reduction it on the flanks leads to the activation of the second order mechanism.

Keywords: Second order visual mechanisms, image filtering, texture, spatial modulation, computer simulation

The work is devoted to the study of algorithms of control subsystem as part of the integrated onboard control system of the aircraft and used in the final part of the trajectory. Algorithms of control subsystems are synthesized on the basis of the theory of optimized delta-transformations of the second order using the principle of the inverted pendulum on a cart. The studies based on the simulation using the developed software model, allowed to estimate as the impact dispersion, and the contribution to it of various subsystems.

Keywords: terminal control, aircraft, on-board integrated control system, optimized delta transformation of the second order, autonomous short range radionavigation system, simulation, software model

In this paper the technology of repair of ground water retaining structures soil mixture improved quality with and without soil mixture install.Use soil mixture , improved sharps and ensure the return of ashes (repaired ) slopes and ridge structures of high strength (up to 13-15 MPa) and water resistance , thus increasing the effectiveness and quality of the repair work and increased resistance to the elements of the structures induced defect . The presence of the bran soil mixture not only enhances the strength of 30-40% , but also gives a significant increase in water and frost (20-30 %), which prevent or substantially reduce the infiltration of water through the filtration body water retaining structures , since high strength and frost soil-concrete being laid on a slope ( in the recovery slope failure ) and groove (at soil dumping and capacity to or in excess of the design marks ) will reliably protect the body of the dams ( dams ) of the drawdown , erosion , buckling , suffusion , and other deformities.

Keywords: technology, dribble feed , soil mixture, sift, cement, fly ash, dam, construction and repair operations, soil mixture installation, factors plan of the experiment, the regression equation

The results of research of raw materials of the logs production for timber construction are considered in the article. Length of logs (for 6 meters assortment), diameter of logs (model logs) and shape of butt (an average shape factor of butt) were studied. The model log is a volume of cylinder which is equal to a calculated volume of logs. The theoretical laws of the random variable for these values are found. The Research was conducted at LLC "Biogran" in Petrozavodsk, Republic of Karelia.

Keywords: Woodworking, cylindering, technological line, wood costraction, factors, length of a log, diameter of a log, butt

In the article authors examine specificities of internal components behavior changing in fiber-optical cable under influence of strong variable uniform electromagnetic field. There are some process variations proposed for describing of obtained results.

Keywords: fiber-optical cable, electrothermal degradation, kevlar, conductivity, open fiber-optical cable, partial discharges, water treeing

The article covers the scientifically substantiated technological developments in the field of automation of technological preparation of manufacture of shoes. Their implementation will provide technologists affordable tool for design of technological processes of Assembly of a Shoe that will improve the effectiveness of footwear manufacturing

Keywords: technological process of manufacture of footwear, automation, information support

The article describes peculiarities of modern syntax parser systems and problems originating in text analysis. As a result of comparative analysis the authors propose a unified approach to processing of unstructured texts in Russian and English which combines morphology and syntax processing. The developed syntax analysis system, using verbs’ valency dictionary, samples of minimal structural schemes of sentences and samples of conjunctions, allows choosing predicative structures of sentences in the text, realizing initial semantic analysis due to semantic content of predicate’s actants and building trees of syntactical subordination of sentences. The derived trees hold elements of tree of constitutives and tree of dependences. The proposed samples and rules organization allows resolving some of the problems of modern parsers. And the use of verbs’ valency dictionary allows reducing the number of sentences syntax analysis variants.

Keywords: automatic text processing; syntax parser; morphological analysis; structural text elements