Justification and results of pilot studies of influence of parameters of a matrix of fixing of the special soft polymeric edges forming the additional locally concentrated rigidity of external material of the warmed clothes of a special purpose is presented in article. Technical characteristics and standard restrictions for the textile material considered at the heart of the projected product taking into account the requirement of GOST and operational criteria are given. Data on modern ways of increase in resistance of an external cover of clothes to the deforming influences for the purpose of preservation of internal volume and, as a result, necessary thermal insulation of clothes are submitted. On the basis of established experimentally dependences of rigidity of the modified material on width and thickness of polymeric channels the way identification of extreme density of filling of polymers of the internal surface of integumentary material with it taking into account the requirement of hygienic and operational character is offered.

Keywords: heat-shielding clothes, design, properties of textile materials, rigidity of materials for clothes, a formoustoychivost

The methods of disposal of biological waste of livestock are considered. It is revealed that traditional methods of disposal biological waste contribute to the withdrawal from circulation of large areas of agricultural land and settlements lands. It is proved that in the implementation of technological solutions (construction of the recycling plant) areas of the cattle burial are reduced, which leads to a more rational use of land resources.

Keywords: legislation, land resources, land use, livestock complex, biological wastes, livestock wastes, recycling, cattle burial, biothermal pit, sanitary-protective zone, the recycling plant, reclamation

In this day and age the application of scientific and engineering inventions may further an effective solution of import substitution and increase in labor productivity. Invention is a new technical solution, having essential differences and a positive effect (new technologies, designs, substances). For instance, the technical result of the invention ""The production method for wire reinforced composite (RU 2619606)"" is the increase in durability of the reinforcing net due to the increase in binder adhesion to the bars, increase in thermal resistance of the net, and the use of simple production equipment. Practical implementation of this invention makes it much easier (unlike its prototype) toproduce wire reinforced composite under the conditions of a specialized enterprise. At the same time it becomes possible to solve a problem of connection durability and thermal resistance of a ready-madenet as in this parameter net connections go near the concrete. Specialists are also interested in the results of the following inventions: self-propelled, self-sustainable unit to clean water reservoirs from water grass (RU 2612445);chiseling method for low permeable soils (RU 2619289); application method for melt water (RU 2619759); erection method for in-situ reinforced concrete construction(RU 2618552); method to increase water-repellent properties of felt materials by means of hydrophobic nanoparticles of silicon dioxide (RU 2579207), mobile foundation (RU 2617826); root and onion lifter (RU 2618322), production method for glass goods (RU 2597419); automatic water intake for underground spring water extraction (RU 2617273), etc.

Keywords: invention,production method for wire reinforced composite, unit to clean water reservoirs from water grass, chiseling method for low permeable soils,production method for glass goods

We consider the problems of complex structure teplotehnologicheskih complexes manufactures pulp and paper industry. Proposed and carried out structural analysis teplotehnologicheskih paper production complex in pulp and paper mills. Use graph theory and matrix analysis. Apply the authors developed a universal application in C # for the analysis of complex structured system of industrial circuits, power complexes. We obtained the results of the work program for the production of paper teplotehnologicheskoj scheme. Revealed all the circuits with the scheme. Identified torn flows for sequential calculation scheme without iterations. structural analysis program can be recommended for use and other industrial multi-loop circuit industry.

Keywords: structural analysis, feedback, teplotehnologicheskih scheme, industry, software, iteration

The article describes the conditions of use of heat pumps in the Russian industry. It proposed to introduce for the food industry, in particular for milk production, teplonanosnaya installation. Heat pump system allows to cover the heat load on the heating, ventilation and hot water supply of a specific milk production due to utilization of energy in the form of relief condensate produced in industrial drying processes. It is shown that the proposed plant will allow useful secondary steam and condensate will reduce fuel costs, simplify circuit heat consumption, reduce the cost of production of thermal energy, reduce operating costs for maintenance of heating systems, heat loss and reduce emissions into the environment.

Keywords: energy efficiency, milk production, relief energy, condensate recovery, heat pump system

Abstract. In the article it is proposed to use flexible surface heating elements Tami in various sectors of the economy: when you heat various materials and products, the heating of concrete in winter time, the heat treatment of the roof during its repair, and disinfection of the soil in greenhouses and greenhouses. Optimal and cost-effective modes of application of Tamou. Shows practical applications of the heating elements. The most effective use of the heating elements when they are combined with different methods or materials for a particular use.

Keywords: Key words Flexible surface heating elements, heated various materials, concrete heating, heat treatment of roofs, disinfection of the soil

In modern conditions developed and used hydraulic calculation of gas networks program. With them, you can get the pressure value at the nodes of the distribution system of gas supply, costs, and gas velocity in the settlement areas. But do not count in these economic aspects, ie, It is not determined the most economical option, which can be obtained by optimizing the individual characteristics of the gas network. These characteristics in the development of the concept of gas supply is a rational distribution points gas reduction and determination of optimal kolichestva.Priveden calculation of the optimal number of the PWG and the optimal diameter of individual sections of the network of medium pressure gas pipelines to ensure the best economic performance timing system. Defined pressure regulator bandwidth capacity for its stable operation. To determine the effect an increase in the inlet pressure on the diameter of the pipeline.

Keywords: optimum range, the optimum load, optimization of pressure, the diameter of the gas-supply circuit, the hydraulic calculation capacity pressure regulator.

The article introduces a new advanced algorithm design foam suit, taking into account the expected exploitation of clothing in conditions of hydrostatic pressure, which determined the rationale for the introduction of common cycle design work additional modules problem-analytical content. In these modules for information on effective parameters of dry constructions (human heat loss and required for the thickness of the thermal protection areas), calculations shall be made in the numerical simulation of sphere that iterations mode algorithm design, allow theoretically test the line selected foam it required thermal protection. The proposed algorithm justified by the peculiarities of traditional methods of designing clothes and existing development methods of calculation of wetsuits, as well as conformity of vector design priority market trends.

Keywords: designing clothing, wetsuit, algorithm design, thermal protection, hydrostatic pressure, stages of design works, light industry, underwater tourism,industrial technology

Results of researches of increase of efficiency of a desulfurization of domestic thermal power plants are reflected in article. Reduction of emissions of dioxide of sulfur due to use of the oversaturated water solutions at dissolution of not extinguished lime anolyte will allow to reduce emissions in the atmosphere on average to 1042,48 tons/year on one 300 MW power unit.

Keywords: issue, desulfurization, sulfur oxide, power unit, anolyte, catholyte, activation, solubility, electrochemical processing, gas mix

As a result of the conducted research, the structure of production workers professional-qualifying staff forming system at cars repair was identified. Interaction regularities of the system elements were determined. The obtained results allow creating an imitating model for production workers professional-qualifying staff optimization. That model lets disclose regularities of various factors’ influence on production workers professional-qualifying staff of maintenance and repair areas of transport enterprises. The imitating model was created as a computer software. The practical use of the obtained results helps decrease the expenses on staff training and loss caused by insufficient qualification of repair workers.

Keywords: production workers staff, transport enterprises, production workers’ qualification, transport-technological cars, modelling

We propose an approach to the evaluation of consumer preferences in construction products. This evaluation will enable us to make strategic decisions – what kind of products and how much of them to produce, and at what price to sell them. To study the preferences of construction products consumers, we recommend to use a method based on the using matrix models. To identify the preferences of construction products consumers, they are given a matrix (a table) that includes the names of the product parameters, the parameters characteristics, their pricing coefficients and sampling rates. In the matrix, the consumers choose and underline one of the characteristics options for each parameter, taking into account the pricing coefficient. After collecting the processed matrices, the most preferable product parameters are determined. The proposed method was tested at conducting marketing researches among potential users of construction products - senior students of Rostov State University of Civil Engineering. The research results formed the basis for recommendations to construction companies dealing with individual housing construction (cottages).

Keywords: the strategy of the enterprise, consumer preferences, marketing research, matrix models, method of preferences evaluation, parameters and characteristics of construction products, choice of options depending on the purchasing power, recommendations

the article considers the degree of market orientation of contemporary Russian companies operating on saturated goods markets (markets of building materials, stationery, household goods, auto parts). To determine the degree of orientation toward the particular component of market orientation was carried out processing of personal data obtained during the survey. Was studied the specificity of market orientation is studied Russian companies, revealed significant prospects of their development. Identified modifications to the structure of the system of assessing the degree of market orientation of companies. The conclusion about the critical importance of the coordination units of the company and its individual employees for successful effective activities throughout the company. Market orientation of companies is shown as a crucial tool for success in today's market.

Keywords: company, rich in the goods market, efficient operation, market, market orientation, target group of customers, competitive environment, cross-functional interaction.

The technology of timber in the forest Fund has a significant value on the cost of production of round timber. Therefore, this task is urgent and most important for logging companies. It is important to pre-determine the criteria for evaluating the effectiveness of the technology of logging operations. It is, above all, efficiency, environment and safety work. In this article studies in some detail their implications for production, workers and the natural environment, which improves the validity of the decisions on the selection of variants of technical and technological organization of the timber industry. The practical significance of the use of evaluation criteria logging is technically focused on improving outcomes for timber production and increasing economic-social and ecological-silvicultural sustainability of the forest sector of the Russian economy. A detailed analysis of the evaluation criteria logging technology allows not only to consider them from the point of view of efficiency, which in most cases occurs, but equally take into account the impact on the environment and safety in the logging operations.

Keywords: logging technology, logging work, the Krasnoyarsk territory, the evaluation criteria, production efficiency, environmental works, security works, a comprehensive use of wood, the technology of logging operations, wood processing

The article discusses issues related to the development of a new affiliate master program " Intelligent Systems in Medicine" National Research Tomsk Polytechnic University and Siberian State Medical University . The main prerequisites for the creation of such a program was the presence of an agreement on strategic partnership between TPU and SSMU , as well as the absence of complete analogues of the proposed master's program , either in Russia or abroad. The project is an extension of an existing master's program "Applied Mathematics and Computer Science " , in which over the last few years has trained more than 20 master's theses related to the use of mathematical modeling in medicine and the development of health information systems . topics of the project. Will also be used for more than twenty years of experience training at the Department of Biological and Medical Cybernetics, Siberian State Medical University

Keywords: Affiliate Master Program, intelligent systems in medicine

The paper discusses the project management standards: national and global enablement. Analyzes modern tools for project management, used in world practice. Listed software products, the most widespread in Russia. The evaluation of the use of project activities universities and enterprises. The main function of the project management system. The features of the application of the project management system. Presents the modern concept of project management and management of the proposed method on the basis of the relationship between the device projects.

Keywords: Project management software, project management functions of the system, method of project management

One of the conditions of reducing the transport work cost is management of the automobile elements life on the basis of objective standards. In the conducted research, forming of the automobile elements life, according to seasonal variations of operational rate and conditions, is considered. A method of correcting coefficients determination was developed; it was based on estimated deterioration for each month, derived from the average deterioration rate of the friction linings and automobile running per month. Calculation of correction factors was carried out with the use of the imitating model. The obtained results allow modelling the braking system elements life, taking into account seasonal unevenness of requirement of them. Using that information, it is possible to correct spare parts requirement and, accordingly, to reduce cars downtime while waiting to be repaired, as well as volume of stocks.

Keywords: the specification of the resource, resource generation, and seasonal variations in the intensity of use of the vehicle, correction specifications resource braking system of vehicles

The article deals with the nature of interrelation of the phenomena ""preservation of national value traditions"" and ""ensuring economic dynamism"" in the context of the strengthening of the national security of Russia in the era of information revolution and the transition to new technological way which is characterized by such relevant characteristics as the intellectualization of industries, the development of new technologies of management and continuous education, the formation of cultural and informational environment. The models of cultural enlightenment and cultural development focused on the resources provision and technological support of socio-cultural and economic (in the innovative vein) development of the country through the partnership of the state and society are described in the article, taking into account the state cultural policy tools as author’s cognitive methodological construct aimed at the accumulation of powerful protective potential of the Russian culture in the practice of public administration.

Keywords: State cultural policy, national security, cultural enlightenment, cultural development, “soft power”, innovative development

On the basis of the conducted research, a theoretical and practical task of reducing repair costs was solved, by determining the regularities of performers qualification influence on repair works productivity and quality. Optimization of repair staff vocational structure involves the use of an imitating model to perform calculations for a specific enterprise. For practical use, a software product «Staff_Qualif_Level» was developed. With the use of that imitating model, the second kind regularities can be obtained: an impact of various factors on the vocational structure of repair staff, according to the minimum cost of cars and repair area downtime. The practical value of the research results consists in the development of the software and method of determination of the optimal repair staff vocational structure, the use of which provides for repair costs reduction.

Keywords: production workers, technical service, transport companies, qualified production workers, efficiency, technical maintenance of cars, simulation

The North-Eastern zone of the Rostov region is typical of peripheral regions. It unites in 14 municipal districts, covering an area of 30 000 km2 (about 1/3 of area of Rostov region), where live 400 000 people. (1/10 of population of Rostov region). Occupying important place in the territorial-production system of the Rostov region, the North-Eastern zone at the same time significantly behind in its industrial development and has the specific features of agriculture as the leading type of activity. Based on an analysis of existing natural and socio-economic factors and resources can identify the following prospective specializations of the territory, designed to increase economic activity here: 1. Agriculture - save specializations in the production of cereals (wheat, barley) and industrial crops (sunflower), expansion of production of vegetables and grapes. 2. Processing of agricultural produce to the local food industry - flour and cereals, bread making, confectionery, oil press, wine. 3. In animal husbandry is actual development of poultry and fish farming. 4. Among the industry has the potential to develop coal mining in the Tatsinskiy district and building materials industry. 5. Processing of agricultural produce to the local food industry - flour and cereals, bread making, confectionery, oil press, wine. 6. In animal husbandry is actual development of poultry and fish farming. 7. Among the industry has the potential to develop coal mining in district Tatsinskiy and building materials industry. 8. In the infrastructure sector can be recognized as a priority transportation and logistics projects Morozovskiy and Volgodonskaya-Tsimlyanskii transport clusters. 9. On the many local tourists attractor has the potential to develop cognitive, memorial, ecological, rural, sports tourism, and recreation at health resorts. They are connected with memorial places of life and activity of the Nobel Prize laureate – writer Mikhail Sholokhov, events of the Second World War, historical and cultural monuments of the Don Cossacks, and vacation in ecologically clean area. Development considered specializations will diversify the economic landscape of the region, to overcome the tendency of direct export outside the districts the untreated materials, saturate the market of its own manufacturers products, activates the job market, minimizes the negative symptoms of the peripheral territories.

Keywords: Rostov region, industry specialization, socio-economic development, crop production, animal husbandry, industry, infrastructure projects, transport and logistics complexes, tourism

Federal Law 261-FZ dated November 23, 2009 introduces a list of organizations subject to mandatory energy audit including development of energy passports and energy efficiency programs. However, the fact of the audit (the presence of energy certificates and energy saving program) is not an indicator of energy efficiency of the organizations surveyed. Currently, the main criteria are the specific energy consumption per square meter of floor space, the presence of meters, the availability of energy service contracts (according to the order of Ministry of Economic Development of the Russian Federation dated October 24, 2011 #591). These criteria do not allow to assess comprehensively the efforts of the staff to improve energy efficiency of the object. The authors have developed methodology allowing to determine the level of energy efficiency of the object (building, group of buildings) based on objective and subjective factors. The proposed approach makes it possible to rank different objects according to their level of energy efficiency, it allows to develop investment programs aimed at energy efficiency improvement in more efficient manner. This method can be used to monitor the energy efficiency of facilities and to assess the quality of energy efficient measures implemented at these objects. Analysis of the indicators in certain areas can detect the most "weak" places for improvement.

Keywords: Energy efficiency, energy saving, specific energy consumption, energy audits, energy efficiency measures, indicators, methodology, monitoring.

The article shows the effectiveness of the application of functional and technological methodology for analysis and synthesis of patentable solutions for continuous cutting of trees and shrubs. Some features of the synthesized technical solutions in this field is shown

Keywords: trees and shrubs, continuous cutting, patentable solutions, functional and technological analysis

With the development of market relations and the increasing competition in the Russian work with the end consumer is becoming increasingly important for each market participant. Consumer behavior - a new field of knowledge that will help market participants to maintain and even increase the profitability of of their business at relatively low material costs. The fastest way to increase income of the company without investing significant resources, is to increase customer loyalty. For the numerical evaluation and opportunities to influence on customer loyalty is computed the customer loyalty index. To increase the effectiveness of measures taken to study and improve customer loyalty index developed a set of program measures on the basis of 1c Alfa Auto. Using the developed software, the process of influence on customer loyalty index, and hence the profits of the enterprise is more efficient both in terms of spent time , and in terms of the effectiveness of taken measures.

Keywords: 1C Alpha- Auto, interview, module of work with claims, customer loyalty, index of customer loyalty

In article it is shown that search of patentable decisions for centrifugal dehydration of wood materials is intensified. The design of basic knots of the device for centrifugal drying of forest products directed on clearing of vibration loadings is considered

Keywords: forest products, dehydration, centrifugal drying

Questions of the classification soil and groundwater conditions  were considered as an important factor of a selection of  types and designs of machines for clearing forest areas from a tree and scrub vegetation. Taking into account the executed analysis the classification of the conditions was proposed the application of machines for clearing the forest area.

Keywords: Tree and scrub vegetation, soil and groundwater conditions, clearing the forest area

The article considers the design of modern electrically driven gas-pumping unit (EGPA). The advantages of a smooth adjustment of speed and performance EGPA. Provides an analysis of options for building the power part of the high-voltage frequency converters, used in the composition of the EGPA at compressor stations of main pipelines. Refer to the element base of high-voltage frequency converters. The characteristics of each of variants. The method of work of the frequency converters. Compare the characteristics of frequency converters of various manufacturers. The basic approaches to manufacturing. Defined the most optimal scheme of the power part of  frequency converters.

Keywords: frequency converter, topology, design, optimization, structural scheme