"Is analyzed the need for the investment of capital, optimizing selection most effective measures, for the reduction of technogenic action, to an improvement in the prirodokhozyaystvennoy situation. Worsening in the state of natural environment definitely requires the additional investment of capital, which draws the rise in price of production and as a result reduction in production efficiency. The tasks of the economic and social development of society must be determined taking into account ecological factor, i.e., taking into account rational use of natural resources. A substantial change in priorities and purposes of the economy of Russia, all branches and its separate sectors is required for this. In this context to the foreground are advanced effective measures for environmental protection in the process of the prirodokhozyaystvennoy activity, which correspond to the concept of steady development.A29 It is expedient to correct the taxation of profit taking into account the profitability of nature-conservation measures, effectiveness of its use with the solution of other social problems, meant both for the society, and for the ecology as a whole: investment tax credits with a considerable decrease or the cancellation of percentages for the use by them; the priority crediting of the subjects of the economy, who inject the best technologies of taking nature-conservation measures; the compensation for the part of the interest rate on the credit due to federal dollar (to 50%). The introduction of innovation technologies in the formation of the system of control of functioning and realization of nature-conservation measures, is the most important tool of an increase in the competitive ability of regions and companies under these conditions. "

Keywords: investment climate, basic capital, ecological crediting, the concept of the steady development

In the article are considered the results of the researches of noncorrodibility of the concrete received with the use of industrial wastes and mineral-chemical additives of various structures in various combinations. Research has shown increase of noncorrodibility, durability and water resistance of the concrete obtained with the use of additives, and the most effective, at that, is the sharing of mineral-chemical additives.

Keywords: concrete, mineral-chemical additives, industrial wastes, noncorrodibility, decstrin, lignosulfonat, kinetic, durability

The problem of utilization of iron ore tailings . The prospects of iron ore mining in the Russian underground . A method for extracting iron from tailings to 9 % of the original content, by mechanochemical processing. The results of particle size distribution , chemical and mineralogical analyzes of samples collected waste ferruginous quartzites LGOK . Experiments were carried out using the methods of planning optimal experiments , Box-Behnken and included 24 experience. Obtained according to the content of metal recovery in the leach solution of sulfuric acid , sodium chloride , rotor speed and the ratio of disintegrant liquid and solid phases. This dependence allows to determine the optimal parameters of technology in terms of " metal recovery ." The resulting secondary processing of tailings to be used in the manufacture of hardening mixes for stowing as an inert filler and binder counterpart .

Keywords: tailings, mechano-chemical activation, iron ore, ferruginous quartzites, metal recovery

The results of computational experiments to determine the characteristics of the porous piezoelectric ceramics based on the methodology, including the effective modules method, simulations of representative volumes on a simple random method and the method of Witten-Sander, finite element method to solve static piezoelectric problems for heterogeneous composite media and the accounting of inhomogeneous polarization near the pores are presented. A comparison of the results of computer simulation with the known experimental data for the porous material PZT-4 and its analogs is realized. It is concluded that the accounting of inhomogeneous polarization in the vicinity of porous provide the better agreement between numerical results and large number of known experimental data. Thus, for most effective constants the smallest errors are obtained for a representative volume of the porous piezoelectric material, constructed by Witten-Sander method.

Keywords: piezocomposite, porous piezoelectric ceramics, inhomogeneous polarization, mathematical modelling, models of representative volumes, finite element method, effective moduli

This article deals with the unification of the elements of wood as on the principle of similarity with the material counterpart. Also estimated the economic benefits of the technical parameters of Glulam. As a result of optimizing the size of these elements. Unification is held on the main criterion of similarity bearing members with the solution graphically. Resulting in optimal size sections are then calculated the opportunity cost of production.

Keywords: unification, glued wooden structures

In article the safety mechanism in construction is shown. Main types of monitoring of unique buildings and constructions are opened

Keywords: risk, construction, monitoring, labor protection, safety

In article questions of planning of load-lifting works are reflected and the assessment of category of degree of risk is carried out

Keywords: risk, load-lifting mechanisms, labor protection, safety, technological cards

In article dynamics questions formation of drop ablation at destruction of bubbling streams are considered at a rupture of bubbles, experimental data of some characteristics of processes of destruction of streams are given, the analysis of the factors influencing formation of drop ablation is made

Keywords: drop ablation, bubbling, drop, stream, blanket

The coloration centres (CC) in crystals of rear earth gallium garnets (REGG): Gd3Ga5O12 (GGG), Gd3Sc1,6Ga3,4O12 (GSGG) и Nd3Ga5O12 (NGG) obtained by Chohraljskiy method, were investigated by methods of optical spectroscopy and spectral analysis in the wavelength range of 0,2-0,87 microns. In the case of keeping the samples under dark conditions, unstable CC were formed in the crystals of GGG and GSGG. The absorption maxima are at λmax1 = 0,243 m and λmax2 = 0,275 m at concentration of N ~ 1018 cm-3. It is suggested that the observed enlightenment is caused by the recharging of growth defects and occurring the energy levels in the band gap of garnets. It appears that these CC correspond to centres of O- holes, originated from gallium vacancies V3-Ga 3+ in tetrahedral and octahedral nots which form near clusters of [V3-Ga 3+ - V2+O2- ]

Keywords: color centers, rare earth gallium garnets, kristylly, Czochralski method, the crystal lattice

Belt conveyors are widely used in factories of building materials. They are used to transport bulk and General cargo on the short, medium and long расстояния.Установка the working body of the screw conveyor brushes allows to increase capacity of the conveyor by eliminating the accumulation of the material to be transported inside the gutter.

Keywords: Operating enterprise, belt and screw conveyors, building materials.

Re-equipment of existing enterprises is comprehensive intensification of production, increase production capacity, production and improvement of its quality while ensuring productivity growth and job cuts to reduce material capacity and cost of production, saving of material and energy resources, improvement of other technical and economic performance of the company in General

Keywords: Modernization, технологическоя line, production, ceramic brick, operating enterprise

Is devoted to the actual problem of constructing classifiers objects given by a point in a multidimensional space of feature values. The principle of linear normal classification of objects in multi-dimensional space of attributes can be used to build a classifier in the case of many complex structures, in general, are inseparable one hyperplane. In such cases, proposed to use a set of hierarchically related normal separating hyperplanes, which is called the normal hierarchical classifier.

Keywords: recognition, classification, feature space, the geometric method

In the process of exploitation of the building there is a reduction of its operational reliability in accordance with the inevitable influence of several groups of factors. The two main groups, influencing the technical condition of the buildings was considered

Keywords: operational reliability; technical condition; engineering diagnostics

To date, the main method of mass production of advanced functional materials for various purposes is the ceramic technology. In the manufacture of multi-component oxide compounds using of ceramic technology is difficult to achieve high uniformity of chemical composition. For activation of the raw ingredients and make it more uniform use of chemical-tions (co-precipitation of salts or hydroxides, spray drying, Cryochemistry) and physical-tions (mechano-chemical, microwave, ultrasonic) methods. The paper presents the results of work on obtaining Ni-Zn-ferrite 2000NN radiation-thermal sintering. The influence of base composition and alloying additions on the electromagnetic properties of the ferrites. Confirmed the effectiveness of the use of surface-active additives To increase the density of the raw pieces and level parameters. We propose a model that explain schaya efficiency of dopants in the radiation-thermal sintering.

Keywords: Nickel-zinc ferrite, radiation thermal sintering, base composition, alloying additives, permeability

"Dynamic mode of heat exchangers is typical for a number of technological thermal plants , as well as air-heating systems , ventilation, and air conditioning. Technologically predetermined control algorithm operating mode heat exchangers in practice implemented by means of manual or automatic adjustment in one or more control parameters . Obviously, the most efficient in the energy and technically and economically dynamic mode control algorithm of the heat exchanger can be detected only in the form of a review of the relevant mathematical model. In this paper we consider a mathematical model of the dynamic operation of the system of heat exchangers with natural air circulation . As input parameters are considered the temperature of hot and cold air streams. Modeled by changing the inputs are heat exchangers and the extent to which these changes will not affect the operation of the entire system. In order to keep the temperature at the i- MOT has not changed , the coefficient of variation should tend to zero , since all the other quantities are limited by technical parameters of the system . By changing the values ​​of the input parameters is analyzed mass flow of hot flow limits are changing the output parameters of the preceding heat exchangers that will not change the entire system ."

Keywords: heat loss into the environment, the starting temperature of the hot (cold) flow, the final temperature of the hot (cold) flow, the range of variation of hot, cold flow