Optimization of technical parameters of the complex for climate control beehives allowed to choose the optimal ratio of the technical parameters of the equipment in accordance with the optimization objective. Evaluation of the efficiency of the self-contained complex is considered in two aspects: in relation to conversion and transmission of energy and in relation to the specific consumption of material resources. In this regard, was chosen two criteria characterizing the efficiency of the complex - the energy efficiency and material capacity. In article presents a methodology to optimize constructive parameters of the energy supply system based on the combined solar plant. The resulting optimal ratio of the parameters are the basis for the engineer's decision that design complex for climate control beehives.

Keywords: optimization, efficiency, system power supply, renewable energy

The article presents the results of a comparative analysis of the authors of the main indicators in the calculation of asbestos dust emissions in the atmosphere air, in accordance with standard procedures and their impact on quality of life.

Keywords: diversification of management, production diversification, financial and economic purposes of a diversification, technological purposes of ensuring flexibility of production

Certification of qualifications in Russia is an analog of professional qualification in the world practice. Nowadays, Certification of qualifications is forming for using it in a action in the near future. Because of it, the mainstream objects of this research are different positive hypothetical results from certification on Russian labour market. Results of research were got by theoretical modeling method. It's show that certification of qualifications theoretically can increase productivity of labour forces, firm's goodwill and labour mobility.

Keywords: the labor market, employment, certification of qualifications, the efficiency of labor, professional development of employees, human capital, employment

Abstract: Operation of motor transport and special equipment is carried out in difficult conditions, the impact of environmental conditions (temperature, humidity, dust, wind, solar radiation) and changes in modes of operation of the machine. This affects the performance of equipment, the number and complexity of repairs. Away from fixed bases (in the field), the problem is particularly acute repairs. One of the most energy-intensive and expensive works are welding (welding parts with a break, welding cracks, fusing metal layer on the worn surface, metal cutting). In this work the welding equipment affect the voltage drops in the supply mains, therefore, produces a large number of failures such equipment. After the equipment is accompanied by an increased amount of electric power consumption, this results in material costs. Previously proposed equipment has improved mass, which reduces the efficiency of the welding. Based on this study was proposed innovative design welding inverter using the resonance effect, with enhanced reliability, low-cost design version (in terms of mass production). In order to improve the reliability and reduce the cost of the proposed design of inverter proposed a number of new approaches. Full-bridge inverter is studied welding power source with the implementation of the resonance effect with a stable and smooth operation, high reliability, because the circuit of the inverter is not sensitive to changes in the supply voltage.

Keywords: repair, motor trucks, welding, full-bridge inverter welding power source, the resonance effect.

The article shows the effectiveness of the application of functional and technological methodology for analysis and synthesis of patentable solutions for continuous cutting of trees and shrubs. Some features of the synthesized technical solutions in this field is shown

Keywords: trees and shrubs, continuous cutting, patentable solutions, functional and technological analysis

The structure of judicial construction examination is presented to the Russian Federation, an example of carrying out judicial construction examination is in details reviewed, the subsequent actions after an assessment of the caused damage are shown

Keywords: Judicial construction examination, assessment of technical condition of the building, damage assessment недвижимости

Presented article provides the results of experimental studies related on the centrifugal impregnation of pine wood process. The studies were carried out respecting influence of the percentage of summerwood and latewood in the impregnated samples on the speed of centrifugal impregnation (impregnant consumption per processing time), and the impregnation depth (the ratio of the volume of absorbed liquid to the total volume of the pore space of a wood sample). On the basis of these results it is shown that the percentage of latewood in a sample does not significantly affect the speed of centrifugal impregnation, while the percentage of latewood affects the impregnation depth (regression model obtained). Furthermore, it is shown that the inner space filled with the impregnant after centrifugal impregnation occurs uniformly along impregnation front trace. The conclusion follows with a list of promising directions for further research on the subject of wood impregnation process using centrifuges.

Keywords: pine wood, centrifuge, impregnation, impregnation front centrifugal method, deep impregnation, summerwood, latewood, uniformity of impregnation

The article is devoted to the economic crisis . The article reveals the causes of the crisis in diversity, reflecting the objective and subjective features. The nature of economic development aimed at making a profit is revealed. The consequences and causes of the crisis are closely related factors. One of the models out of the crisis is considered over-investment that leads to an abundance of goods that society can not consume. Rapid technological advances associated with the investment, do not necessarily lead to a crisis. Their effect may be in abnormal artificially inflated consumption. Another model is the development of the financial and credit system that contribute to the accelerated development of the economy. Globalization as a kind of model leads to the instability of the national economies. To date, commercial, financial and credit relations tied together the economies of most countries. Now states have become parties in the economic competition, credit and financial relations, which weakened their role stabilizing fiscal policy within their own countries. Also the psychological factors have important role in crisis, since the behavior of economic actors may be a "trigger".

Keywords: Economic crisis, production, profit, factor, management, investment, technical progress, consumption, banking system, economic activity.

Problems stroitelstvavremennyh winter roads - winter road. The trends in the development of designs snowgroomers machines as a way to reduce the human and economic costs. Shows the design of the unit on the basis of a self-propelled scraper MoAZ-60148

Keywords: Temporary winter road, winter road, vibratory compaction, snow mass, snow-grooming machine

Discusses ways to ensure trouble-free operation of hydraulic drive, a construction of the high pressure hose, which contains carbon-fiber yarn as reinforcement element

Keywords: Hydraulic drive, uglevolovkno, high pressure hose, pressure, negative temperature

With the development of market relations and the increasing competition in the Russian work with the end consumer is becoming increasingly important for each market participant. Consumer behavior - a new field of knowledge that will help market participants to maintain and even increase the profitability of of their business at relatively low material costs. The fastest way to increase income of the company without investing significant resources, is to increase customer loyalty. For the numerical evaluation and opportunities to influence on customer loyalty is computed the customer loyalty index. To increase the effectiveness of measures taken to study and improve customer loyalty index developed a set of program measures on the basis of 1c Alfa Auto. Using the developed software, the process of influence on customer loyalty index, and hence the profits of the enterprise is more efficient both in terms of spent time , and in terms of the effectiveness of taken measures.

Keywords: 1C Alpha- Auto, interview, module of work with claims, customer loyalty, index of customer loyalty

The article gives quite a full view of the model of social health of student youth from theory and methodology of structural and integral approach developed by T. Parsons. The author introduces a special modus components for the model of social health. This article is original and opening wide perspectives for further research.

Keywords: model, social integration, social health, student youth, cognitive modus, emotional component, behavior component, state, evaluative modus

The presence of colossal dielectric constant in the low frequency region is observed in the strontium ferrite with hexagonal structure. This result can be explained in the framework of the "grain-layer" and the polarization of Maxwell - Wagner in the ceramic medium. The effect of negative capacitance in ceramic strontium hexaferrite at a frequency of less than 2.10 Hz has been detected.

Keywords: hexaferrite strontium, ferromagnetic, insulator, semiconductor, colossal dielectric constant, negative capacitance, high-temperature annealing, X-ray structural analysis, full-profile analysis, electron microscopy.

The main trends of updated automobile construction are the use of permanent for lowering mass overall dimension characteristics of electric equipment and an automobile as a whole. Diamond-abrasive treatment of sintered powder permanent magnets on the basis of Barium ferrite, strontium and cobalt is connected with difficulties of obtaining surfaces with little meanings of rouhness due to the higher brittleness, tendecy to crack formation, water-soluble technological lubricants (FWSTL) РВ-6 have been developed which contain fractal clusters and generate in contact diamond-abrasive tooltreated powder magnetic material of films with high load and lubricating abilities. Estimation criteria of water-soluble lubricacants efficiency (WSTL) at diamond-abrasive treatment by friction machine СМЦ-2 have been suggested. Comparative tests on the suggested criteria of efficiency FWSTL РВ- 6 and Lubricating cooland (LC) Blasokut 4000 SF 004 at treating by a diamond disk 2720-0031 ГОСТ 16167-90 of Barim ferrite 16Ба190 have been made. A conclusion has been drawn that РВ-6 possesses high efficiency.

Keywords: permanent magnet, Barium ferrite, functional water- soluble technological lubbricants, fractal cluster, diamont disk, friction machine

The article considers the process of civil society establishment in the context of shaping a new dialogue paradigm of thinking. The distinctive feature of this article is that it reveals an important aspect of formation the democratic institutes in contemporary Russian society. The author suggests the investigation of the process of cultural interaction in the context of the modern world trends of integration and disintegration

Keywords: civil society, dialogue paradigm, democratic institutes, state, society, personality, civil initiation, culture, the dialogue of cultures, intercultural exchange

Communicative and informative interaction in virtual reality formed a special kind of thinking - a virtual network thinking and Net-thinking, network mentality and Internet-fobies

Keywords: thinking, virtual reality, virtual network thinking, symbolic and symbolic thinking, thinking, computer-mediated communication, audio-visual thinking, video clip thinking, Net-thinking, network mentality and Internet-fobies

The article describes an alternative approach to the construction of the transponder timing systems. Describes the proposed approach to the creation of a highly mobile system, the basic principles of its operation and the analysis of experimental results

Keywords: transponder timing systems, time-stamping, wireless tags, specialized communication protocols

In this article the testing of analog characteristics of AFE-circuits ADS1293A on measuring stand are presented. The analysis of the characteristics of the chip to be used in medical equipment.

Keywords: AFE-chip, Holter monitor, cardiograph, testing energy, medical equipment

The article presents the results of research and development of a method for testing hypotheses about the form of the probability density function of the random variable in the face of considerable uncertainty a priori. The results obtained, contrary to the traditional skepticism in regard to the processing of data samples, the volume of the order of ten values ​​indicate the potential to improve the reliability of their classification.

Keywords: processing of statistical data, small sample size, the numerical method, the simulation supplement statistical experiment, random process.

In this article the question of the possibility of using the accelerometer to control the medical device. The analysis of existing models for this purpose. Then made ​​all the necessary tests at the research booth

Keywords: accelerometer, taping, tap-tap, LIS2DM, ADXL345, MMA8450Q, medical equipment, self-powered

This article deals with the problem of adaptive threshold for the allocation of R-wave with Holter. Considered one of the embodiments of the microcontroller detection algorithm R-wave. Based on this algorithm, the analysis of the stability at two variants prediction threshold and different coefficients. Obtained plots of the stability of the algorithm on the selected coefficients.

Keywords: microcontroller, Holter ECG, QRS - complex ehlektrokardiosignala, adaptive threshold, the allocation of R-wave, electrocardiography, the algorithm adjust the threshold.

In article it is shown that search of patentable decisions for centrifugal dehydration of wood materials is intensified. The design of basic knots of the device for centrifugal drying of forest products directed on clearing of vibration loadings is considered

Keywords: forest products, dehydration, centrifugal drying

The technologies of getting energy from the unlimited sources render possible to build the energy-independent houses with the ecologically clean infrastructure in remote areas and to solve the problems of the energy supply of the already-existing objects. In Azerbaijan and in Russia the mission-oriented research is carried out as both countries have either traditional or alternative stored energy sources, and much work is in progress on the parallel development of modern technologies of energy providing of human life support including technologies based on the use of mineral waters which are of interest in the field of bioengineering resources. The primary chemical and thermophysical properties of mineral waters underlie in creation of the technologies of the use of their resources. The special investigations on the determination of chemical properties of mineral waters of separate regions of the Stavropol Territory of the Russian Federation are substantiated and assumed in the article. In the paper the experimental works of the chemical composition of nine mineral waters of the sources of the regions of Pyatigorsk and Yessentuki cities are carried out by the methods of experimental atomic emission spectroscopy and ion chromatography. The major part of the established chemical elements includes sodium (Na) (from 844 up to 6620 mg/liter); then calcium (Ca) as one of the main sources of cations, and also kalium (K) and magnesium (Mg) (they compose from 6.7 up to 92.2 and 15 up to 76.2 mg/liter correspondingly). Sulfur (S) is also important with the quantity of 362 mg/liter; silicon is in sufficient number as part of these mineral waters – from 3.5 up to 27.3 mg/liter. The small part includes lithium (Li), boracium (B) and strontium (Sr). The findings render possible to expand the world data base of the corresponding natural resources of the Russian Federation for the development of the ecologically oriented technologies.

Keywords: Mineralnye Vody, chemical composition, pilot studies, nuclear and issue spectroscopy, ionic chromatography

The article is devoted to one of the urgent problems of the present-day Russian reality that is the family institution transformation which progresses in the network of the crisis of traditional family and forming the present-day family pattern. This period is characterized by forming transformational space in domestic and conjugal sphere that is presented with coexistence of traditional and new forms of domestic relations. What is in store for Russia and its diverse in ethnocultural and sociocultural respect regions? What pattern of family is going to be prevailing in Russian society in the nearest future? The author is trying to answer these questions in this article with using the synergetic methodological paradigm of investigation.

Keywords: the family institution, the family, the traditional family, the present-day family, egalitarian family, patriarchy, matriarchy, the crisis of traditional family, synergetic paradigm, transformation of family.

By means of Lemma Lorentz solution to the problem of excitation of an infinite periodic microstrip array with non-linear loads (NN), whose parameters vary in time, was obtained. For the formation of a system of integral equations nonlinear boundary conditions of impedance type, arising from polynomial representation of V-I characteristics of non-linear loads was applied. Numerically patterns in dependence of the reflectance of such a array at combination frequencies on the electrical parameters of loads were identified. The experimental data which confirm possibility of control with levels of combinative frequency components by frequency change and amplitude of voltage pump are given.

Keywords: microstrip structure, non-linear loads, spectrum of the reflected signal, combinational harmonics, parametric excitation