×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

  • Methodology of the system calculation of reactive power compensation in electric networks of industrial enterprises and power systems

    The model of reactive power compensation system calculation in industrial enterprises and power systems electric networks is developed. The authors take into account three main problems: multidimensionality, informational fragmentation and incompleteness of information. The quadratic model of  reactive power compensation is examined. The calculation method main phases which uses all the advantages of quadratic model and methods of its improvement are given.

    Keywords: compensating devices, reactive power compensation, power system, industrial enterprises electric networks, quadratic model, mathematical model, incompleteness of information

  • The structurally functional model of virtualization of the vital world

    This article considered the structurally functional model of virtualization of the vital world constructed using the methodology of functional modeling. The aim of the work is to creature a model of the process of virtualization of the vital world of modern youth. The research is based on theoretical data and empirical indicators of the sociological research of graduate students of the Southern Federal University. The description and process of construct a model are determined by the phenomenon of human needs, self-identity. The results allow us to touch on the question of projecting a virtual life into a real one, which entails a change in everyday life.

    Keywords: functional modeling, virtualization, needs, self-identity

  • Technical science. Building and architecture

  • The effect of the physical state of chemical additives at the time of introduction into a gas-concrete mixture on the kinetics of gas evolution and the gas diffusion coefficient

    "n this article, the influence of the physical state of chemical additives at the moment of their introduction into a gas-concrete mixture on the kinetics of gas evolution and the gas diffusion coefficient is considered. To test the working hypothesis, two compounds were designed and manufactured. As a part of С№1 chemical additives were entered in the form of a colloidal solution. A comparative analysis of the results of physical and mechanical tests of the aerated concrete samples of the tested compositions showed that the introduction of chemical additives in the form of a colloidal solution lowers the average density in the dry state due to a more intensive course of the gas evolution reaction without significantly reducing the compressive strength. At the same time, the average density increases in the composition of CN2.

    Keywords: kinetics of gas evolution, gas diffusion coefficient, aerated concrete mixture, reactivity, expansion of aerated concrete mixture, colloidal solution

  • Investigation of the intensity of gas release and reactivity of aluminum powder PAP-1 with the simultaneous introduction of a gas generator with a partially hydrated aerated concrete mixture into a cellular concrete composition

    This article considers the effect of the introduction of a partially hydrated aerated concrete mixture on the intensity of gas evolution, the reactivity of a disperse gas generator, and the physical and mechanical properties of aerated concrete. To test the working hypothesis, two compounds were designed and manufactured. The pure dispersed gas generator was introduced into composition C№1, and a mixture of a gas generator with a partially hydrated gas-concrete mixture was introduced into the composition C№2. A comparative analysis of the results of physical and mechanical tests of the aerated concrete samples of the tested compositions showed that its introduction increases the compressive strength, while reducing the density of aerated concrete. At the same time in the composition of С№1 there is a higher density and a drop in strength

    Keywords: Partially hydrated mixture, gas generator, aluminum powder PAP-1, reactivity, device PGV-2, kinetics of gas evolution, average density in the dry state, compressive strength

  • The development of high-rise construction in Rostov-on-Don

    The article deals with the stages, causes of origin and actual problems of high-rise construction in Rostov-on-Don. Examples of successful development of high-rise buildings in Russia and abroad are given. The problematic aspects are analyzed, possible ways of solving on the basis of the experience of other cities in the construction of unique buildings are shown.

    Keywords: high-rise construction, town-planning, skyscraper, design, architecture, number of storeys, Rostov-on-Don, development, zoning, world practice, normative and legal documentation

  • Improvement of the technology for building a multistory substructure

    The article proposes some innovative technical solutions to build a multistory substructure for residential and public buildings. To erect a building, it is proposed to construct a system of interconnected rail runways at a first storey level along which travelling gantry cranes and special platforms will move. To descend the machines, building materials, instruments to the design level, during the underground space development, it is proposed to employ travelling gantry cranes. In order to quickly relocate loads and machines from one work zone to another, an additional system of rails is mounted along which special platforms are moving. The management of the gantry cranes and special platforms movement is done by the remote operating panels. The superstructure is built in the traditional way using a tower crane, track mounted, for example. The application of the proposed designs when building multistory substructures will enable to improve the technological processes of building the substructures. The proposed technology will help to use it in all the climatic areas of our country.

    Keywords: construction of a multistory substructure, slurry wall, process of excavation, bored pile, substructure

  • A mathematical description of efficiency of process of hydrodynamic palisadian foam layer of open source companies in the construction industry

    The article presents the physical essence of the method of hydrodynamic reduction of air pollution by foam method as the most effective technology palisadian open for extended sources. The mathematical description taking into account the physico-chemical properties of dust and a bubble of foam, and the parameters of the return to technological raw materials dust particles due to the different physical mechanisms of their capture. Parametric dependence of the efficiency of dust removal as a result of setting foaming method of palisadian provides the ability to forecast its calculation for the considered technology implementation process palisadian air bearing features of the interaction of dust with a layer of foam.

    Keywords: Palisadian, dust particles, method foam, foam layer, the efficiency of palisadian, belt conveyors

  • A modern approach to the assessment of the acoustic impact on the adjoining residential zone under construction or reconstruction of airport complexes

    In the article the modern approach to the assessment of the acoustic impact on the adjoining residential zone under construction or reconstruction of airport complexes. While the features of sources of acoustic impact as ground handling and flight operations. Assessment of acoustic impact on the adjoining residential zone under construction or reconstruction of airport complexes, according to the authors, involves several stages. The implementation proposed by the authors of the stages of the assessment of acoustic impact will allow to identify the zones of acoustic discomfort and plan a set of measures aimed at reducing noise in those areas and thus enhance environmental validity under construction or reconstruction of airport complexes.

    Keywords: assessment of acoustic impact of the construction of the airport complex, adjacent residential zone, the zone of acoustic discomfort

  • Study of parameters of operation of the fan in a thermally non-stationary ventilation system

    The aim of this work is determination of regularities that determine the operation parameters of the fan in a thermally non-stationary ventilation system contains a heater located along the air flow after the fan. It is established that the ventilation system, containing the heater, has two characteristics aerodynamic resistance related to the volumetric air flow at the sections of the network before and after the heater. It is proved that when using the superposition method, P-L characteristics to determine the parameters of the fan in the system, you must apply the P-L characteristic of the network is related to the volumetric air flow to the heater. The obtained dependences determine the parameters of the fan depending on its aerodynamic characteristics and the location of the heater in the system.

    Keywords: the ventilation system is in a thermally transient mode, fan, heater, energy efficiency, energy conservation

  • Estimation of sustainability achieved by the building through the implementation of energy-saving technologies

    The article describes the main provisions of methodology developed by the authors for evaluation the effectiveness of resource-saving solutions in the housing construction. This methodology is based on the assessment of sustainability, which is obtained by residential buildings through the implementation in practice the resource-saving technologies. In its framework, the authors propose a system of indicators characterizing the social, economic and environmental aspects of building’s sustainability and the corresponding scale ranges for their scoring. Taking into account the theory of pair comparison, the authors developed an algorithm for determining the contribution of each indicator in the overall integral sustainability of the building.

    Keywords: energy- and resource-saving technologies, sustainable development, method of expert evaluation, method of paired comparison, effectiveness of resource-saving technologies, residential buildings, integral indicator of building's sustainability

  • Making formwork systems of porous artificial wood

    The paper underlines the need for use of composite and nano-materials in place of natural materials, which is explained by depletion of global resources and increasing environmental pollution. This is why the focus is currently shifting toward the use of a composite material – porous artificial wood (PID-IV) – developed by the Irkutsk State University for making framework systems required to strengthen rectangular structural elements of buildings and structures. The framework system in question has a deck made of PID-IV. Further, the structural test was carried out in line with the effective regulatory documents, and the use of the suggested framework system was substantiated.

    Keywords: composite material, porous artificial wood, formwork deck, design, structural test

  • Structurally insulating foam modified fiberfill

    The article considers the topicality of the development of cement foam concrete meeting modern requirements for energy saving and energy efficiency. The interrelation of physical and mechanical properties of cement foam concrete with the features of its structure formation at macro- and microlevel is considered. The main components for the manufacture of structural and heat-insulating cement foam concrete are described. The results of experiments on the determination of the dependence of the parameters of the structure of a foam concrete mixture, which form the physical and mechanical properties of finished products, are presented. A mechanism has been established for the active participation of particles of fibrous cellulose filler in the organization of the structure of a foam concrete mix and samples based on it. The optimal concentration of fibrous cellulose filler in the raw meal mix was confirmed.

    Keywords: structural and heat-insulating foam concrete, modifying additives, technical carbon, fibrous filler

  • Analysis of the emergency multi-apartment housing stock of mining towns of the Eastern Donbass

    Information was collected on the multi-apartment housing stock of six mining towns in the Rostov region: Gukovo, Donetsk, Zverevo, Kamensk-Shakhtinsky, Novoshakhtinsk and Shakhty. A general analysis of emergency residential buildings was carried out in accordance with the year of construction and the number of buildings commissioned and square meters of living space. In the example of the city of Shakhty, the location of the emergency houses relative to the mining zones at shallow depths, the spread of loess subsidence soils, and possible flooding is discussed in detail. Thanks to the map created with the help of the GIS program SAS.Planet, conclusions are drawn about the location of the emergency structures. It is determined that the largest number of houses that are recognized as unfit for further exploitation are located within the distribution zones of the three negative factors listed above or in the immediate vicinity of them.

    Keywords: loess soils, flooding, restructuring of the coal industry, postmining, urban areas, emergency buildings, geoinformation systems

  • On the choice of construction site of military-Patriotic centers in Russia

    the design of a new object presupposes not only the functional aspect, but an important factor is the location of the building or structure. The choice of location is one of the fundamental criteria: it is necessary to take into account the infrastructure and architectural appearance of the selected area, the needs of the district or region in the projected facility.

    Keywords: constructivism, the architectural appearance, the blue line, multi-center, prototype, monuments, cultural centers, the Great Patriotic war

  • To the design of reinforced concrete structures with mixed reinforcement

    In this article, the problem of the application of high-strength steel reinforcement in flexible compressed reinforced concrete elements is considered. Conditions are considered for establishing the minimum necessary proportion of prestressed reinforcement in flexible columns with pre-stretched reinforcement with mixed reinforcement.

    Keywords: concrete, reinforced concrete, structures, technologies, installation, reinforced concrete structures, tension, prestress, beams, reinforcement, efficiency

  • Effective staff management through decentralization of power

    Discusses the problems of effective management of the firm. we study the question of decentralization and delegation of authority to field offices. Seem positive and negative sides of this approach in the light of modern researches of employees of the don state technical University. The conclusion is based on the efficient organization of work units from the creative activity of managers Executive managers

    Keywords: organization of construction; personnel management; methods of management of the company

  • Optimization of the set of short-term environmental events

    The article presents the result of research on the current state of water resources in Rostov region. We studied the parameters that constitute the main indicators of the hydrosphere of the region. A set of urgent measures on preservation of water balance of the region.

    Keywords: organization of construction; subcontractors; methods of management of the company

  • Economic problems of the industry in light of the current state of integrated housing

    Deals with topical problems of complex housing construction, raising questions about the quality of construction projects. The authors conclude about the causes and regularities of the current crisis in the construction industry and its links with housing

    Keywords: economy sector, organization and management in construction, urban planning

  • The main tasks for development of capital construction in the Rostov-region

    Discusses actual problems of organization and management of capital construction in the Rostov region. Proposes a number of measures aimed at improving the existing system of capital construction in the development of the region and industry. Recommendations for improvement of organizational forms of management of construction enterprise in modern economic conditions. Indicated the need for a uniform management of the entire set of activities in capital construction.

    Keywords: organization of construction, capital construction, methods of control of the company, project management

  • Application of fiber-reinforced concrete in reinforced concrete structures

    This article deals with the field of application of fiber-reinforced concrete, reveals the advantage of using fiber-reinforced concrete in comparison with conventional concrete. The efficiency analysis of the use of fiber-reinforced concrete is analyzed.

    Keywords: fiber concrete, concrete, reinforced concrete, structures, technologies, installation, fiberglass concrete, reinforced concrete structures, tension, prestress, basalt fiber concrete

  • On the issue of restoring experimental reliabilityreinforced concrete structures

    In this article, we consider ways to restore the operational reliability of reinforced concrete structures, the types of spacers, the method of reinforcing a reinforced concrete column with semi-circular steel sheets. The reinforcement of the elements by the biaxial transverse compression of concrete is also considered.

    Keywords: concrete, reliability, reinforced concrete, structures, technologies, installation, reinforced concrete structures, struts, prestressing, columns, reinforcement, bearing capacity, reinforcement.

  • Investigation of the effect of the ratio of the rigidity of the structural system to the dynamic parameters of a multi-storey building depending on the seismicity of the platform

    The results of a computational experiment performed in the Lira-SAPR environment are considered in the article. The purpose of the experiment is modal analysis of various structural schemes of multi-storey reinforced concrete frame under pulsating and seismic influences. The considered design schemes differ in the ratio of the frame and diaphragm components of the frame. It was calculated three series of samples, differing by the ratio of rigidity. The stiffness ratio varied from 20% to 65.9%. Within each series calculations were performed for seismicity of 7, 8 and 9 points. For each variant of seismicity, the soils of the 1st, 2nd and 3rd seismicity categories were considered. It is established that when the role of the frame part increases, the distribution of the modal masses shifts towards the lower forms of oscillations, and the numerical values of their frequencies decrease. Accelerations of the nodes of the coating from the ratio of rigidity do not depend. They increase with increasing seismicity of the site. The ratio of stiffness affects the total consumption of the reinforcement of slabs. This influence is significant in the range of values of the ratio from 20.5% to 42.5%. Further increase in the ratio of stiffness to the consumption of reinforcement influences slightly.

    Keywords: seismicity, category of soils by seismic properties, modal analysis, rigidity, selection of fittings, PC Lira-SAPR

  • The approach to evaluating DLP-systems using fuzzy logic

    Currently, the software market offers a multitude of diverse DLP-systems designed to protect confidential information from leaks. Since such systems have a relatively high cost, it is advisable to select the optimal option before acquisition and implementation, as incorrect selection will lead to unnecessary costs and ineffective control of information. The paper describes the base of the rules of the fuzzy inference system, designed to evaluate the DLP-system. Practical use of the proposed fuzzy system allows to perform a reasoned choice of such a DLP-system that most fully meets the requirements of a particular organization and provides the required level of protection of information from leaks. At the same time, the evaluation is performed according to several criteria, the values ​​of which, based on expert estimates, are input variables of the fuzzy inference system. At the output of the system of fuzzy inference, a comprehensive evaluation of the DLP-system is formed, which reflects the degree of its suitability for implementation at a particular enterprise.

    Keywords: Information security, data protection, protection of confidential information, DLP-system, artificial intelligence, fuzzy logic, fuzzy inference system

  • The use of glass in façade finishing materials

    The main purpose of walls and mineral plaster, decorative finishing of external walls, but also to protect the walls from constant exposure to atmospheric agents. In addition to low water absorption exterior stucco needs to have adhesion to various bases, good vydyhaemoy and resistance to cracking. The most effective way to improve the properties of facade plasters is the introduction of hydrophobic redispersible powders which reduce the water absorption of plasters improve their adhesion to the substrate and water vapor permeability

    Keywords: mineral plaster, water repellents, redispersible powder dry mixture of stearates of zinc, water absorption, volumetric water repellency